Woods Equipment CZR2652B, CZR2242B manual Tools Required for Assembly, Uncrate Unit, Tire Pressure

SET UP INSTRUCTIONS

WOODS

TOOLS REQUIRED FOR ASSEMBLY

-Wrecking bar

-Claw hammer

-Sockets: 1/2”, 15/16

-Wrenches: 18mm, 1/2”, 9/16”, 3/4”, 15/16”

-Tire pressure gauge

NOTE: All references below to the “right” or “left” are with respect to an operator at the controls.

1.UNCRATE UNIT

a)Discard packing materials. Loosen the caster wheel axle bolts and bumper bolts to remove the shipping brackets.

Discard shipping brackets.

b)Re-install and tighten bumper bolts.

c)Tighten caster wheel axle bolts against caster axle spanner bushings to 80 ft/lbs.

2.TIRE PRESSURE

a) Set tire pressures to 14 lbs/in2 (1.0 kg/cm2). Tires are overinflated for shipping.

3.TRACTION LEVERS

a)Tighten bolt A.

b)Sit on the machine. Levers C may be moved to upper set of holes in bar B for a better operator fit.

12