Woods Equipment CZR2652B, CZR2242B manual ARM Rest Height Adjustments

ADJUSTMENTS

WOODS

ARM REST HEIGHT ADJUSTMENTS

1.Remove acorn nuts 1, plastic washers 2, arm rest 3 and second set of plastic washers 4.

2.Adjust carriage bolts 5 to desired height A, B, or C by pushing on the carriage bolts 5 until they are free from the locking slot, adjusting them to the desired height and then pulling the carriage bolts 5 into the desired locking slot A, B, or C. Bolts must be placed into slots a like heights or arm rest will not fit.

3.Re-assemble washers 2 & 4, arm rest 3, and acorn nuts 1 in reverse order from disassembly. Hold carriage bolts 5 in locking slots while tight- ening acorn nuts 1 to prevent them from falling out of the locking slots. Tighten nuts 1 until de- sired resistance in arm rest rotation is achieved.

C C B B A A

4

3

2

1

5

1 2 4 5

38