Woods Equipment 872500G, 872502G, MZ2661K BELT REPLACEMENT

22

WOODS

Note: Always use WOODS, Inc.replacement belts, not general purpose belts. WOODS,

Inc.belts are specially designed for use on commercial mowers and will normally last lon-

ger.

BELT REPLACEMENT

CUTTERDECK BELT

1. Tilt oorplate all the way forward.

2. Set the cutterdeck in a middle height-of-cut posi-

tion.

3. Use a 3/8" ratchet and extension to back

tensioning idler off to remove belt from idler.

Remove belt from cutterdeck pulleys.

NOTE: Use the 3/8" ratchet in the square hole A on

the idler.

4. Remove belt from clutch pulley.

5. Install the new belt by performing these steps in

reverse order.

A

PUMP-DRIVE BELT

1. Remove engine-cutterdeck belt (see engine-cutterdeck belt replacement).

2. Attach an extension to a 3/8" drive ratchet. Insert the ratchet extension in the square hole of the pump

drive idler arm. Use the ratchet handle to rotate it enough to remove the pump drive belt.

3. Install a new pump drive belt in the same manner as it was removed.

4. Re-install engine-cutterdeck belt (see engine-cutterdeck belt replacement).

Contents

Main PARTS MANUAL MOWN MACHINE MAN0865 MZ2252K MZ2661K AVERTISSEMENT WARNING IMPORTANT MESSAGE TABLE OF CONTENTS WOODS NOTICE !!! ATTENTION! BECOME ALERT! Signal word denitions Page ASSEMBLY AND SETUP MAINTENANCE CHART ECNANETNIAM NOITAREPO E N I G N E SCILUARDYH ENIHCAM Page CHECK DAILY BATTERY Page HYDRAULIC SYSTEM WOODS SPARK PLUGS ENGINE OIL FUEL FILTER HEAVY DUTY CYCLONIC AIR CLEANER ENGINE COOLING WOODS CLEANING MACHINE WASHING MACHINE Page DECK LEVELING REAR DECK ROLLERS HEIGHT OF CUT COUNTERBALANCE SPRINGS WOODS PARKING BRAKE CONTROL LEVERS TRACKING HANDLES FRONT DECK LIP DAMPERS WOODS HYDROSTAT ADJUSTMENTS BELT REPLACEMENT CUTTERDECK BELT A PUMP-DRIVE BELT POWER UNITS ENGINES: DRIVE SYSTEM: OPERATOR PRESENCE INTERLOCK SYSTEM: WEIGHT: ENGINES WOODS LARENEG ENIGNE CONSTRUCTION: CUTTERDECK DRIVE SYSTEM: CUTTERDECKS Page FIGURE 1 UPPER ENGINE DECK ASSY FIGURE 1 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY * NOT ILLUSTRATED UPPER ENGINE DECK ASSY FIGURE 2 LOWER ENGINE DECK ASSY/CLUTCH FIGURE 2 LOWER ENGINE DECK ASSY/CLUTCH FIGURE 3 BUMPER FIGURE 3 FIGURE 4 FUEL TANKS/CONTROL PANEL FIGURE 4 FUEL TANKS/CONTROL PANEL FIGURE 5 BRAKES/REAR WHEEL FIGURE 5 BRAKES/REAR WHEEL FIGURE 6 OIL COOLER FIGURE 6 FIGURE 7 AIR COOLED HYDRAULICS FIGURE 7 AIR COOLED HYDRAULICS FIGURE 8 HYDROGEAR PUMP WOODS HYDROGEAR PUMP FIGURE 9 AIR COOLED WIRE HARNESS BATTERY ENGINE BLOCK (GROUND) (BLACK) (RED) AIR COOLED WIRE HARNESS FIGURE 9 Page SEAT ASSEMBL Y FIGURE 10 FIGURE 11 OPTIONAL FOLDING ROPS KIT (970410) FIGURE 11 OPTIONAL FOLDING ROPS KIT (970410) FIGURE 12 STEERING/DECK LIFT FIGURE 12 STEERING/DECK LIFT FIGURE 13 CRADLE ASSEMBLY FIGURE 13 CRADLE ASSEMBLY FIGURE 14 CRADLE & CASTER ASSEMBLY FIGURE 14 CRADLE & CASTER ASSEMBLY FIGURE 15 52" SIDE DISCHARGE FIGURE 15 52" SIDE DISCHARGE FIGURE 16 61" SIDE DISCHARGE FIGURE 16 61" SIDE DISCHARGE Page Page FIGURE19 DECALS-POWER UNIT FIGURE 19 Page Page Woods Equipment Company LIMITED WARRANTY (Mown MachineTM Zero-Turn Mowers and Woods BoundaryTM Utility Vehicles) LIMITED WARRANTY (Mown MachineTM Zero-Turn Mower and Woods BoundaryTM Utility Vehicle Replacement Parts)