Woods Equipment RBE5, RBE4, BSE5 manual Assembly, Assemble Box Scraper

Assemble Box Scraper

1.Place the A-frame hitch over the three corresponding holes on the inside of the scraper frame as shown in Figure 10.

2.Secure the hitch pin (5) with lock washer and nut. Repeat for opposite side.

3.Finish securing the frame by installing the four sets of bolts (10), nuts (6) and washers (7).

4.Remove lock pins (4) and scarifiers. Rotate scarifiers so teeth face forward and replace in slots with lock pins and safety pins.

10

7

6

5

4

Figure 10. A-Frame Support Bars &

Scarifiers Assembled

8 9 7 6

1

5

4

10 7 6

2

3 11

1.Top link mount - left

2.Top link mount - right

3.Scarifier

4.1/2 x 3" Lock pin

5.Category 1 mounting pin with nut and lock washer

6.3/4" Hex nut

7.3/4" Lock washer

8.3/4 NC x 5" Hex head cap screw GR5

9.Top link spacer

10.3/4 NC x 2 Hex head cap screw GR5

11.Scarifier tip

Figure 11. Box Scraper Assembled

MAN0561 (8/25/2006) Assembly 15