REAR BLADE
Remove Components from Shipping Configuration
1.Remove nut (5), washer (6) and pull pin (7) from top of blade.
2.Remove hitch from the blade.
7 | Hitch |
5 6
DP4
Figure 12. Shipping Configuration - Rear Blade
Assemble Rear Blade
1.Rotate hitch to its upright position and slide back onto the bolt on top of blade as shown in Figure 13.
REAR
BLADE
BOLT
Figure 13. Slide Hitch onto Bolt Atop Rear Blade
2.Secure with the removed nut (5), washer (6) and pull pin (7) as shown in Figure 14.
3.Secure the hitch pins (4) facing outward with lock washers and nuts as shown in Figure 15.
5 | 6 |
| 7 |
Figure 14. Hitch Attached to Rear Blade
4 |
Figure 15. Rear Blade Hitch Pin Assembly
1 | 6 |
| |
5 | 7 | ||
|
3
4
2
1.Hitch main frame
2.Blade assembly
3.3 x 3" Black plastic cap
4.Category 1 mounting pin with nut and lock washer
5.3/4" Lock nut
6. | 3/4" Flat washer | DP3 |
7. | 7/8 x |
|
Figure 16. Rear Blade Assembled
16Assembly
(Rev. 9/5/2008) MAN0561 (8/25/2006)