Uneven Terrain

type: hilly, level, or rough￿￿￿￿￿￿￿. Plan your mowing pattern to travel straight forward whenever possible. Mow with uncut grass to the right. This will distribute the clippings over the cut area.

„Do not operate or transport on steep slopes.

„Do not stop, start, or change directions sud- denly on slopes.

„Use extreme care and reduce ground speed on slopes and rough terrain.

„Watch for hidden hazards on the terrain during operation.

Pass diagonally through sharp dips and avoid sharp drops to prevent hanging up tractor and mower. Prac- tice will improve your skills in maneuvering rough ter- rain.

Removing Mower from Tractor - Storage

Follow cleaning procedure, page 17.

1.Disengage tractor PTO and raise mower with the 3-point hitch.

2.Disconnect mower driveshaft￿￿￿￿￿￿￿from tractor PTO.

3.Collapse driveshaft as far as possible and store it in PTO hanger bracket to prevent ground contact.

4.Place blocks under mower side skids. Lower mower onto blocks, disconnect mower from tractor 3-point hitch, and carefully drive tractor away from mower.

„Keep children and bystanders away from stor- age area.

Figure 6. Mower Storage Position

OWNER PRE-OPERATION CHECK LIST

(OWNER'S RESPONSIBILITY)

___

Review and follow all safety rules and safety

 

decal instructions on page 5 through page 9.

___

Check that all safety decals are installed and in

 

good condition. Replace if damaged.

___

Check that all shields and guards are properly

 

installed and in good condition. Replace if dam-

 

aged.

___

Check that chain shielding is in good condition

 

and replace any damaged chain links.

___

Check that all hardware and cotter pins are prop-

 

erly installed and secured.

___

Check to ensure blades are sharp, in good condi-

 

tion, and installed correctly. Replace if damaged.

___

Check that equipment is properly and securely

 

attached to tractor.

___

Make sure driveline spring-activated locking pin

 

or collar slides freely and is seated firmly in trac-

 

tor PTO spline groove.

___

Make sure the driveline guards and tether chains

 

are in good condition. Guards must rotate freely

 

on driveline. Fasten tether chains to the tractor

 

and the equipment as instructed.

___

Inspect area and remove stones, branches or

 

other hard objects that might be thrown, causing

 

injury or damage.

___

Do not allow riders.

___ Check all lubrication points and grease as instructed in “Lubrication Information” on page 14

&page 15. Make sure the PTO slip joint is lubri- cated and that the gearbox fluid levels are cor- rect.

___ Set tractor PTO at correct rpm for your equip- ment.

___ Make sure tractor ROPS or ROPS cab and seat belt are in good condition. Keep seat belt securely fastened during operation.

___ Before starting engine, operator must be in trac- tor seat with seat belt fastened. Place transmis- sion in neutral or park, engage brake, and disengage tractor PTO.

MAN0260 (Rev. 1/12/2007)

Operation 13

 

 

Page 12 Page 14
Page 13
Image 13
Woods Equipment RD72, RDC54, RD60 manual Removing Mower from Tractor Storage, Owner PRE-OPERATION Check List
Page 12 Page 14

RD60, RD72, RDC54 specifications

Woods Equipment is renowned for its innovative and efficient landscaping solutions, and the RD series of rotary cutters exemplifies this reputation. The RD60, RDC54, and RD72 models are designed to cater to varying needs in land management, providing robust performance and ease of use.

The RD60 model stands out for its impressive cutting width of 60 inches, making it an ideal choice for commercial and residential applications. Its heavy-duty construction ensures longevity, with a rugged deck design that can withstand challenging terrains. The RD60 features a slip clutch protection system that prevents damage to the cutter during operation by absorbing shock loads. Additionally, its adjustable skids allow for varied cutting heights, making it versatile for different types of vegetation.

RDC54, while slightly smaller with a cutting width of 54 inches, is designed with a focus on efficiency and maneuverability. Its compact build makes it perfect for smaller properties or tight spaces. The RDC54 boasts a quick-attach mounting system, enabling users to easily connect and disconnect the cutter from their tractor. Users can also appreciate the innovative dual-blade design that enhances cutting performance, resulting in a finer mulch for improved decomposition when tackling thicker grass and brush.

On the other hand, the RD72 takes productivity to the next level with its 72-inch cutting width. This model is particularly favored by professionals looking to cover large areas quickly. Equipped with an advanced drive system, the RD72 delivers consistent power to its blades, ensuring clean cuts even in tough conditions. The model features a robust frame and reinforced side panels, making it suitable for heavy-duty applications. Furthermore, its quick-adjustment feature allows operators to change the cutting height smoothly and efficiently, maximizing versatility.

All models in the RD series incorporate cutting-edge technology, such as optimized blade design and improved airflow, which contributes to a cleaner and more efficient cut. Durability is a common theme across the series, with high-quality materials used throughout the construction ensuring these rotary cutters can handle the rigors of daily use.

In conclusion, Woods Equipment's RD60, RDC54, and RD72 rotary cutters offer a blend of durability, efficiency, and advanced features, catering to the diverse needs of landscape professionals and property owners alike. Whether the job requires finesse or brute force, there's an RD model built to deliver results.
Top Page Image Contents