Woods Equipment SG100 manual PRE-OPERATION Check List, Owners Responsibility

PRE-OPERATION CHECK LIST

(OWNER'S RESPONSIBILITY)

___ Review and follow all safety rules and safety decal instructions on pages 3 through 7.

___ Check that all safety decals are installed and in good condition. Replace if damaged.

___ Check to make sure all shields and guards are properly installed and in good condition. Be sure that either the discharge shield or complete vac- uum attachment is installed.

___ Check that all hardware and cotter pins are prop- erly installed and secured.

___ Check that equipment is properly and securely attached to tractor.

___ Inspect area and remove stones, branches or other hard objects that might be thrown, causing injury or damage.

___ Check all lubrication points and grease as instructed in Tractor Stability, page 10.

___ Make sure driveline spring-activated locking pin or collar slides freely and is seated firmly in trac- tor PTO spline groove and in gearbox spline groove.

___ Do not allow riders.

___ Consult local utilities before digging. Know loca- tion of and avoid contacting all underground cables, pipelines, overhead wires and other haz- ards in digging area.

___ Check condition of stump grinder teeth before operation.

™

MAN0155 (Rev. 2/16/2007) Operation 13