DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
DEALER’S RESPONSIBILITY
Inspect stump grinder thoroughly after assembly to ensure it is set up properly before delivering it to the customer. The following check list is a reminder of points to inspect. Check off each item as it is found sat- isfactory or after corrections are made.
___ Check that shields and guards are properly installed and in good condition. Replace if dam- aged.
___ Check all bolts to be sure they are properly torqued.
___ Gearboxes are not filled at the factory. Prior to delivery, fill as specified in the Tractor Stability, page 10 and check to see that there are no leak- ing seals.
___ Check that all cotter pins and safety pins are properly installed. Replace if damaged.
___ Check and grease all lubrication points as identi- fied in Driveline Lubrication, page 14.
DELIVERY CHECK LIST
DEALER’S RESPONSIBILITY
___ Point out the safety decals. Explain their meaning and the need to keep them in place and in good condition. Emphasize the increased safety haz- ards when instructions are not followed.
___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.
___ Show customer how to make adjustments and properly mount stump grinder to tractor.
___ Show customer how to make sure driveline is properly installed and that
___ Instruct customer how to lubricate and explain importance of lubrication.
___ Point out the correct mounting and routing of hydraulic hoses. Explain that during operation, mounting, dismounting and storage, care must be taken to prevent hoses from pulling, twisting and kinking.
MAN0155 (Rev. 2/16/2007 | Dealer Check Lists 23 |
|
|
