-18-
D('*0()$Jg\\[;i`ccGi\jj
J<KLG
Before installing a drill bit, test run the machine to iso-
late any problems that may occur.
(% Plug the drill press into the power supply.
)% Turn the drill press FE; if there is a problem, turn
the drill press F== immediately.
The drill press should run smoothly, with little or no
vibration or rubbing noises. Strange or unusual noises
should be investigated and corrected before operating
the machine further. See GX^\*' for troubleshooting
instructions.
K\j k  Il e
For your convenience, the adjustments listed below have
been performed at the factory and no further setup is
required to operate your machine.
However, because of the many variables involved with
shipping, some of these adjustments may need to be
repeated to ensure optimum resu lts. Keep this in mind as
you start to use your new drill press.
Step-by-step instructions for these adjustments can be
found in theJ<IM@:<section of this manual.
(% ;\gk_Jkfg:Xc`YiXk`feGX^\)-
)% =\\[J_X]kJgi`e^K\ej`feGX^\).
I\Zfdd\e[\[8[aljkd\ekj