D('*0()$Jg\\[;i`ccGi\jj
J<IM@:<
>\e\iXc
This section covers the most common service adjustments or procedures that may need to be made during the life of your machine.
If you require additional machine service not included in this section, please contact Woodstock International Technical Support at (360)
;\gk_Jkfg:Xc`YiXk`fe
The drill press comes fitted with a depth stop to use when drilling multiple holes at the same depth. The scale on this depth stop can be calibrated if it ever becomes incorrect.
KfZXc`YiXk\k_\[\gk_jkfg#[fk_\j\jk\gj1
(% Loosen the lower jam nut and calibration nut shown in=`^li\*'.
)% Use the calibration nut to zero the depth stop scale with the depth stop bracket.
*% Hold the depth stop at zero, and tighten the lower jam nut to hold the depth stop in position.
+% Test the depth stop by measuring how far the spin- dle actually moves with respect to where you set the depth stop.
D8B< JLI< k_Xk pfli dXZ_`e\ `j legcl^^\[ [li`e^ Xcc j\im`Z\ gifZ\$ [li\j @] k_`j nXie`e^ `j `^efi\[# j\i`$ fljg\ijfeXc`ealipdXpfZZli%
| Depth Stop |
| Bracket |
Calibration | Lower |
Nut | Jam Nut |
=`^li\*'% Depth stop calibration.
J<IM@:<
