-12-
W1737/W1738 Owner's Manual (Mfg. 10/09+)
SETUP
The following is a description of the components
shipped with the SHOP FOX®W1737/W1738.Laythe
components out, and use Figure 9 and the list below
to inventory your package. If any parts are missing,
find the part number in the back of this manual and call
WoodstockInternational,Inc.at360-734-3482ore-mail:
tech-support@shopfox.biz.
SandingUnit(NotPictured) ..............................(1)
DustPorts4" ................................................(3)
Sanding Belt 100 Grit .....................................(1)
Sanding Belt 180 Grit .....................................(1)
PlatenGraphiteFlap ......................................(2)
PlatenFelt ..................................................(1)
Tool Box .....................................................(1)
—PhillipsHeadScrewdriver#2 ..........................(1)
—Standard Screwdriver #2 ...............................(1)
—Open-EndWrench8/10mm ............................ (1)
—Open-EndWrench12/14mm ..........................(1)
—Open-EndWrench17/19mm ..........................(1)
—MetricHexWrenchSet .................................(1)
—Door Keys .................................................(2)
—CeramicLimitSwitchRods ............................(2)
—Flexible Grease Gun Extension .......................(1)
—PlatenRemovalTool ....................................(1)
—Fuses4Amp ..............................................(2)
Item Qty.
Figure 9. Partsandtoolinventory.
Unpacking
Box Contents
The Model W1737/W1738 has been carefully packaged
for safe transporting. If you notice the machine has been
damaged in shipment, contact your machine dealer and
the shipping company immediately.
SETUPSUFFOCATION
HAZARD!
Immediately discard
all plastic bags and
packing materials to
eliminate choking/
suffocation hazards for
children and animals.
To gain access to the lag bolts that attach the machine
to the shipping pallet, you must temporarily remove
both lower side panels.
NOTICE