-13-
W1737/W1738 Owner's Manual (Mfg. 10/09+)
SETUP
The Model W1737/W1738
is a heavy machine at 1781
lbs. Use power or hydraulic
equipment to avoid serious
personal injury or death.
• Floor Load: Your sander weighs 1781 lbs
and has a 521⁄8"X493⁄8" footprint. Some
floors may require additional bracing to
support both machine and operator.
• Working Clearances: Consider existing and
anticipatedneeds,sizeofmaterialtobe
processed through the machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your sander.
• Lighting:Lightingshouldbebrightenough
to eliminate shadow and prevent eye strain.
• Electrical: Electrical circuits must be
dedicated or large enough to handle
amperage requirements. Outlets must be
located near each machine, so power or
extensioncordsareclearofhigh-traffic
areas. Follow local electrical codes for
proper installation of new lighting, outlets,
or circuits.
MAKE your shop “child
safe.” Ensure that your
workplace is inaccessible
to youngsters by closing
and locking all entrances
when you are away. NEVER
allow untrained visitors in
your shop when assem-
bling, adjusting or operat-
ing equipment.
Cleaning Machine
The upper sanding drum of your sander is
coated with a waxy grease that protects it from
corrosion during shipment. Clean this grease off
withasolventcleanerorcitrus-baseddegreas-
er.DONOTusechlorine-basedsolventssuchas
brake parts cleaner or acetone—if you happen
to splash some onto a painted surface, you will
ruin the finish.
Machine Placement
NEVER use gasoline or
other petroleum-based
solvents to clean with.
Most have low flash
points, which make them
extremely flammable.
A risk of explosion and
burning exists if these
products are used. Serious
personal injury may occur
if this warning is ignored!
ALWAYS work in well-
ventilated areas far from
possible ignition sources
when using solvents to
clean machinery. Many
solvents are toxic when
inhaled or ingested. Use
care when disposing
of waste rags and
towels to be sure they
DO NOT create fire or
environmental hazards.