Woodstock W1755 owner manual Setting Fence Stops, To set the 45˚ inward fence stop, do these steps

W1755 6" Parallelogram Jointer

Setting Fence Stops

The fence stops simplify the task of adjusting the fence to 45˚ inward, 90˚, and 45˚ outward (135˚).

To set the 45˚ inward fence stop, do these steps:

1.Tilt the fence approximately 45° inward (Figure 60) onto the positive stop bolts, using a 45° square as a gauge.

2.Loosen the jam nut on the 45° inward positive stop bolt shown in Figure 60.

3.Adjust the positive stop bolts until the fence is exactly 45° inward while resting on the bolts (verify the angle with a 45° square).

4.Retighten the jam nut loosened in Step 2.

To set the 90˚ fence stop, do these steps:

1.Loosen the set screw in the plunger lock collar shown in Figure 61, and loosen the fence tilt lock.

2.Using a 90° square, adjust the fence to the 90° posi- tion, as shown in Figure 62.

3.Tighten the set screw in the plunger lock collar.

4.Adjust the indicator (if necessary) to 0° to calibrate the fence tilt scale.

To set the 45° outward fence stop, do these steps:

1.Loosen the fence tilt lock, and position the fence against the 45° outward positive stop bolt.

2.Loosen the jam nut on the 45˚ outward fence posi- tive stop bolt (Figure 63).

3.Adjust the 45˚ outward positive stop bolt until the fence is exactly 45° outward while resting on the bolt, as shown in Figure 63.

4.Retighten the jam nut loosened in Step 2.

Positive

Stop

Jam Nut

Figure 60. Fence adjusted 45˚ inward.

Plunger Lock	45° Outward
Collar	Positive Stop
	Bolt
Fence Tilt
Scale

Figure 61. Fence controls.

Figure 62. Adjusting fence to 90˚.

SERVICE

Figure 63. Adjusting fence 45˚ outward.

-37-