Model W1822 (For Machines Mfg. Since 9/10)
Miter Cutting
The crosscut fence can be positioned for miter cuts between 50° the left and 50° right.
To perform a miter cut, do these steps:
1.DISCONNECT SAW FROM POWER!
2.Position the fence at the rear of the sliding table and at the correct angle, then lock it in place (see the example illustrations in Figures 20– 21).
3.Position and secure the extension table and extension fence to provide the optimum support for the workpiece.
4.Mount the workpiece flat on the tables and firmly against the crosscut fence.
5.Turn the saw ON, firmly hold the workpiece on the tables and against the fence, then push the fence and sliding table forward to pass the workpiece all the way through the blade to make the cut.
6.Turn the saw OFF, then remove the workpieces.
Blade |
Workpiece |
Figure 20. Example of miter cutting with the fence positioned 45° to the right.
Blade |
Figure 21. Example of miter cutting with
the fence positioned 45° to the left.
OPERATIONS
