-11-
Model W1831 (For Machines Mfg. Since 2/12)
SETUP
Keep. machine. disconnected. from.
power.until.instructed.otherwise.
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.

Unpacking

SETUP
The following is a description of the main components
shipped with the Model W1831. Lay the components out
to inventory them.
Note: If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Box.Inventory.(Figure.3). Qty
A. Spindle Sander Assembly .................................1
B. Table Inserts 1⁄2", 3⁄4", 1", 1
1⁄2", 2", 3" ............1 Each
C. Arbor Wrench ...............................................1
D. Spindle Hex Nut ............................................1
E. Spindle Washers 5⁄8", 7⁄8", 1
3⁄4" ...................1 Each
F. Sanding Drums 3⁄4", 1", 1
1⁄2", 2", 3" ...............1 Each
G. Sanding Sleeves 1⁄2", 3⁄4", 1", 1
1⁄2", 2", 3" ........1 Each
H. Base Washer 23⁄4" ..........................................1

Inventor y

Figure.3. Box contents.
A
B
C
DE
F
G
H