Model W1831 (For Machines Mfg. Since 2/12)
MAINTENANCE
Schedule
For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section.
Before Each Use
•Inspect the sanding drums and sleeves for wear or damage.
•Check for worn or damaged wires.
•Check for any other unsafe condition that could hamper operation of this machine or cause potential injury.
After Each Use
•Turn the sander OFF.
•Clean up any sawdust or particle residue from the machine.
•Protect table.
Make sure that your machine is unplugged during all maintenance pro- cedures! If this warning is ignored, seri- ous personal injury may occur.
Monthly Maintenance
•Clean/vacuum dust buildup from inside the sander body and off of the motor.
Cleaning
To clean your machine, vacuum excess wood chips and sawdust, and wipe off any remaining dust with a dry cloth. Sawdust and other particles can also work their way under the table insert, so this area also needs to be cleaned. Sanding sleeves can be cleaned with the
To clean the table:
1.DISCONNECT SANDER FROM POWER.
2.Remove sanding drum and table insert as described in the Sanding Drum/Sleeve Installation instructions on Page 17.
3.Wipe or vacuum out any dust or particles that have accumulated beneath the table insert on the table opening, shown in Figure 14.
4.
5.To protect the table from rust, coat the table surface with a quality metal protectant.
Table Insert 
Table Opening
Base Washer
Spindle
Washer
|
| Spindle | |
Sanding Drum | |||
| Hex Nut | ||
and Sleeve |
| ||
|
| ||
|
|
|
Figure 14. Table insert area.
MAINTENANCE
