15

PA S SWO R D

You will be issued a password that is unique to your receiver and cannot be used with another receiver. Passwords are entered once and then stored. This password remains stored and valid for the whole subscription period. A password is either 22 or 25 digits in length. The receiver can store up to 8 passwords for different services.

Entering password mode:

1)Press and hold the SERVICE COMPONENT + button for more than 2 seconds. The LCD panel shows “A _ _ _ _ _”. The blinking cursor indicates your current position.

2)Enter the first 5 digits.

Enter the first digit by using the BROADCAST CHANNEL ▲/▼ buttons

to scroll through digits (0–9). When the proper digit is in the field, use the SERVICE COMPONENT + and buttons to move the cursor to the left or right.

3)After you have entered the fifth digit, press the SERVICE COMPONENT + button to move to the next screen.

The LCD panel shows “B _ _ _ _ _.”

4)Enter the next 5 digits.

As you complete each screen, press the SERVICE COMPONENT + button to move to the next screen. When you are finished, you will have completed five screens, “Axxxxx” through “Exxxxx”. If you were given a 22-digit password, leave the last 3 digits of screen “Exx _ _ _” blank.

Completing the password entry process

To end the password entry process:

1)Press and hold the SERVICE COMPONENT + button for more than 2 seconds. “CHECKING” appears on the LCD panel as the password is being verified. If the password is correct, the LCD panel will show “ACCEPTED” for 3 seconds.

Page 15
Image 15
WorldSpace wssr-11 manual Entering password mode, Pa S Swo R D