MODE LIGHT BUTTON / REMOTE CONTROLLER FUNCTIONS OVERVIEW
Mode Light button
You can press the Mode Light button on top of the Roboboa’s head to stop him in place, and then enter one of three different Lighting modes: Spotlight, Wide, and Full.
When Roboboa is in these Lighting modes, he cannot see or move by himself. However, he will revert back to Aware mode after about 1 hour if he does not receive a signal or any other input.
NOTE: If you hold this button down for more than 2 seconds, Roboboa will enter Safety Light mode where he will turn his lights on anything shown in front of him. (For more details, see page 13).
Remote controller functions overview
Most of the Roboboa functions can be controlled from his
Roboboa’s remote controller can be used by right or left handed users. You can lay it flat, on its side, or even use it as a smart flashlight. Each of the buttons on the remote controller can be used for more than one function:
Note: Both the small Mode button and the large Mode button on the remote controller have the same function for left or right hand use.
Command | Description |
|
|
Instant commands | Press any action button quickly once. |
| Example: press the Demo button. |
|
|
Held commands | Press and hold any action button for more than |
| 2 seconds. |
| Example: press and hold the Demo button to |
| get Party mode. |
|
|
Mode commands | Press and hold the Mode button, then press any |
| action button within 2 seconds. |
| Example: Hold the Mode button down then |
| press the Demo button to change the volume. |
|
|
