SHUTDOWN FUNCTION / MODE LIGHT FUNCTION
Shutdown function
Turn your robot completely off from the remote control. The following table describes the Shutdown function.
Mode light function:
This mode turns your robot into a
Function | Description | Indicator |
Shutdown | Hold Mode then press the |
|
| Stop button within 2 seconds. |
|
| This causes your robot to |
|
| completely power down. |
|
You can enable the Light mode by pressing the Mode button on the remote controller, or the Mode light button on the Roboboa’s head.
HOLD
M O D E
Roboboa will emit a Shutdown sound to confirm that he is completely shut down. You can only wake him up by toggling the power button on the robot’s tail OFF then back ON.
When you press any of these buttons, all motors, sensors, and awareness on Roboboa stop, and he stays where you point him from the remote.
The following table describes the Mode light function:
Function | Description | Indicators |
Mode light | Firmly press the Mode button on the |
|
| remote controller once. Mode light- |
|
| ing function turns your robot into a | SPOT |
|
| |
| button freezes your robot in place and |
|
| cycles lights through four brightness | WIDE |
| modes: Spotlight, Wide, Full and Off |
|
| (Aware mode) |
|
| Each time you press the Light mode |
|
| button you can press on the directional | FULL |
|
| |
| pad to point him anywhere. |
|
|
| OFF |
|
| (AWARE Mode) |
Mode lighting stays on for about 1 hour after you press any Mode button or change brightness. After that, the robot defaults to Aware mode.
12