Power Supply
The Power Supply converts the DMX512 signal level from the lighting console into Coloram I / Coloram II control signal which it then sends to each Color Changer along with 24 volts DC. The Power Supply features a DMX bypass relay to pass the DMX signal to the DMX output connector in the event of AC power loss.
The Power Supply features an 8 character LED display and three selector buttons. This user interface is used to select the starting DMX channel, set operating modes, send remote commands to the Color Changers and view Color Changer status.
Coloram Cables
The Coloram cable connects the Coloram Power Supply outputs to the Coloram Color Changers or other products and provides them with power and control signal. The Coloram cable uses
Note: The cable used in the Coloram System is the same cable which is used in the Forerunner System and may be referred to as either Coloram cable or Forerunner cable.
6
