2Installing Xenith Pro Firmware
This chapter includes the requirements and procedures you need to install and use Wyse®
USB Firmware ToolTM to update your thin client to Xenith Pro firmware.
TIP: The purpose of the Wyse USB Firmware Tool is to configure a bootable USB key for
device firmware. In the following procedures, you will create a configured USB key
containing the firmware contents that you need, and then boot from this configured USB
key on the thin clients you want to convert to push the contents of the USB key onto these
target devices.
Requirements
• Machine with a minimum of 16GB of free space running either of the following:
·Windows 2003 Server
·Windows Server 2008
·Windows Server 2008 R2
·Windows 7 Enterprise (32-bit and 64-bit)
·Windows 7 Ultimate (32-bit and 64-bit)
• USB Key:
·USB 2.0 only
·USB key size should be 16 GB (see also “USB Keys - Troubleshooting Boot Issues”
on page 9)
CAUTION: During the USB key configuration process the USB key will be reformatted.