Wyse Technology wyse x class 2 and 4-gb ram upgrade option kit Installing X Class RAM, Procedures

2 Installing X Class RAM

This chapter contains information for users of Wyse X class mobile thin clients who must install new RAM.

Requirements

•Small Phillips screwdriver

Warning

RAM modules may be susceptible to damage by Electro-Static Discharge (ESD). All industry-standard cautions should be followed to avoid ESD. Before you remove or install a module, touch any metal part of the chassis and keep that contact with the chassis during the installation process.

Procedures

Caution

Follow all precautions listed in the Quick-Start Guide that came with your mobile thin client for disconnecting and reconnecting the mobile thin client.

1.Perform a proper shutdown of the mobile thin client by closing all files and ending your session, and then pressing the power button to turn off the mobile thin client.

2.Unplug the power cord and power adapter, and then remove any other cables from the mobile thin client.

3.Position the mobile thin client to access the bottom cover, and then remove the screws from the cover using a small Phillips Screwdriver as shown in Figure 1.

Figure 1 Removing the bottom cover screws