Installation
Motion Detector
90˚
MOTION DETECTOR
Installation
Testing the Motion Detector
•Set the slide switch on the Motion Detector to position 1.
•Press and hold the TEST button for about a second. The LED flashes twice when you release it.
•Wait 20 seconds for the sensor to settle.
•Walk in front of the Motion Detector. The indicator LED lights each time it senses movement. Check the coverage area and reposition the sensor as required.
•Press the TEST button to return to normal operating mode.
Note: The Motion Detector will automatically return to normal operating mode after about 2 minutes.
Installing the Motion Detector
•Attach the Motion Detector to a wall at a height of 5 to 6ft using the mounting bracket and screws provided.
Note: The Motion Detector has a special lens that 'looks' downwards. It must therefore be mounted to face outwards horizontally, i.e. do not 'aim' the sensor downwards.
•Set the slide switch to position 1 for instant triggering for maximum sensitivity or position 2 to trigger only after two movements have been sensed.
Registering the Motion Detector with the Security Console
•Fit four AA Alkaline batteries in the battery compartment.
•Press the CODE button on the back of the Motion Detector using a pencil or other pointed object to generate a new random security code.
•Set the slide switch on the Security Console to INSTALL.
•Press the TEST button on the Motion Detector. The console beeps once to confirm and the next available zone LED lights.
Note: If the Motion Detector senses movement before you press the TEST button it may register itself automatically.
10 | 11 |