Xantech D5RH installation instructions Source Loop Outputs Source Loop OUT

Source Loop Outputs (SOURCE LOOP OUT)

The Source Loop Outputs are used only when adding D5XH Expansion Hubs to the D5RH in order to create more than four zones. These connectors carry Audio, Status and IR information between the units and allow seamless functionality in all areas of the home with no complicated cross-wiring, splicing or specialized adapters needed. When adding a D5XH Router, simply connect CAT-5 Patch Cables from the ‘SOURCE LOOP OUT’ of the D5RH to the ‘SOURCE LOOP IN’ of the D5XH as shown in Figure 3.4. Complete connections for expanded systems are described in the section entitled Multi-Chassis Connections.

D5RH

Cat-5 Ethernet

Patch Cables

D5XH

Figure 3.4: Source Loop Outputs

08905153B - 16 -