Xantech D5RH installation instructions D5IP

Figure 3.10 to Figure 3.12: Local Source to D5IP Connections

NOTE: Multi-channel digital audio formats (5.1, 7.1 etc.) are not supported by the D5IP and D5RH. However, many audio/video sources allow you to change the digital output to PCM Stereo. In most cases this will allow multi-channel audio sources to output a “summed” stereo signal through the digital output. Consult the audio/video source manual for details.

NOTE: Some audio sources which utilize a digital output require that you enable the digital output before it will function. If there is no audio present, check the setup menu of the audio source to confirm that the digital output is enabled.

D5KP Rear	D5IP
	Side View

Cat-5

L+ L- R+ R-	- +
SPEAKERS	PWR IN

Figure 3.13: D5IP to D5KP Connections

08905153B - 24 -