Xantech D5RH installation instructions D5IP Source Input Wall Plate

D5IP Source Input Wall Plate

A D5IP Source Input Wall Plate is required to add a Local Source to a zone. The wall plate has audio and IR connections similar to the SOURCE INPUT of the D5RH. A run of CAT-5 terminated to T- 568A standard (see Figure 2.2) is required between the D5KP Amplified Keypad and the location designated for the D5IP. Connections between a source component and the D5IP are detailed in Figure 3.10 to Figure 3.12, while connections between the D5IP and the D5KP Amplified Keypad are detailed in Figure 3.15. NOTE: Set RCA/OPT/COAX switch to RCA (up) position.

08905153B - 23 -