TRIM AND MANTEL INSTALLATION FOR WOOD BURNING FIREPLACES
•The fireplace face may be left exposed or trimmed. If trim is installed, fasten it securely to face of fireplace. Seal any cracks between trim material and face of fireplace. Cracks can cause a fire and prevent fireplace from working prop- erly.
•Place wall ties in mortar joints of masonry trim. Fasten wall ties to face of fireplace with sheet metal screws.
•Use only
Combustible
Wallboard Trim
Area to Be |
Sealed |
Figure 40 - Spacer Location
LOCATING FRONT AND SIDE CLEARANCES
To find front clearances, extend a line from back corner of unit to 4" in front of fireplace face and 1" outside screened opening. Combustible materials may be placed within shaded areas. Note: Do not let combustible materials overlap black painted surface more than 1/8". See Figure 41.
Trim may butt against side walls of fireplace. The other 3 walls must have ¾" clearances.
Extended Line |
|
| ¾" |
Combustible | Separation |
Material |
|
within Shaded | 0" Clearance |
Area | to Front Side |
| Walls |
4" Reference |
|
1" Reference |
|
Figure 41 - Front and Side Clearances
WARNING | Seal any space between face of | ||
warranty. | |||
|
| fireplace and | |
|
| material. Failure to seal this crack is a | |
|
| possible fire hazard and will void the | |
|
|
|
|
|
|
|
|
WARNING |
| Do not cover or restrict |
|
|
|
| |
|
| side vent areas with |
|
|
| surround or trim materials |
|
|
|
|
|
LOCATING MANTEL
Maximum depth of mantel is 12"
A = | 6½" - | Minimum from top of fireplace opening to bottom |
|
| of any combustible trim material sticking out no |
|
| more than 1½" beyond face of fireplace |
B = | 12" - | Minimum from top of fireplace opening to bottom |
|
| of combustible trim material sticking out more |
|
| than 1½" from top of fireplace opening |
Combustible | Combustible |
|
Mantel |
| |
Wallboard |
| |
|
| |
| 12"max. | Non- |
|
| |
| Combustible | |
| Surround Trim | |
| B |
|
| A |
|
| Top of |
|
| Fireplace |
|
| Opening |
|
Figure 42 - Locating Mantel
32 | 61D0008 |