TRIM AND MANTEL INSTALLATION FOR GAS APPLIANCES
Mantel Trim Installation (Unvented Gas Appliances Only)
The fireplace face may be left exposed or trimmed. If trim is installed, fasten it securely to face of fireplace. Trim materials must not extend closer than 3/8" to the vertical edge of fireplace opening if you plan to use glass doors.
1.Install hood on fireplace with mantels 12" from the opening of fireplace. Mantel may be no more than 12" deep. Combustible framing members may be placed across top spacers. See Figure 38.
2.Combustible mantel and/or trim may be installed within shaded area in Figure 39. Use only non- combustible materials below top of spacers and behind front face.
WARNING
Hood (p/n 075629) must be installed when mantel is 12" from fireplace opening.
Note: Glass doors must be removed when using hood.
Note: No
combustible
materials 12" within 12" 
max. 
of opening.
12"
2¾" Hood
(p/n 075629)
421/2"
| 8" | Shaded |
| Area | |
|
| |
Top Spacers |
| |
|
| Wall Board |
11/2"
max.
54"
47"
Figure 38 - Locating Mantel 12" from Opening | Figure 39 - Placement of Combustible |
when Using Hood | Mantel and Trim without Hood |
Note: These instructions are for acceptable combustible mantel location in GAS APPLIANCES ONLY. See Figures 40 through 41 for acceptable combustible mantel locations for wood burning fireplaces.
61D0008 | 31 |
