D5XH ZONE OUT

Additional zones beyond the six that connect to the D5XH are connected directly to their corresponding D5XH’s ZONE OUT ports using Cat-5. See Figure 3-19 for details.

Figure 3-19: D5XH ZONE OUT Connections

4. Settings & Operation

DIP Switch Settings

There are two groups of DIP switches on the rear panel of the D5XH that must be set prior to operation:

UNIT ID

KEYPAD PAIRING

UNIT ID

Each D5XH chassis has a corresponding DIP switch setting relative to the other chassis. To set UNIT ID DIP switches:

1.Correctly identify which chassis controls the associated zones.

2.Assign a unique unit ID based on the silkscreen on the rear panel.

3.Repeat this process for the each other expansion chassis.

 

 

08905154A

- 27 -

Page 27
Image 27
Xantech D5XH installation instructions Settings & Operation, DIP Switch Settings, Unit ID