Xantech XIS100 installation instructions Base Station Rear View

BASE STATION – REAR VIEW

4Video Format

5IR IN

6RS232/422

7Component Out

8A/V Output

9Power In

BASE STATION

This selector switch is used to select NTSC or PAL format. (See NOTE 2 on Page 6)

Modulated IR. Connect to a Xantech IR bus system.

Connect to RS232 or RS422 communications devices. Use Xantech RS422 adaptors, sold separately, if needed (See Page 10). To change between 232 and 422, use the on-screen ‘settings’ menu.

Component video output to be connected to a display.

Composite video and Left & Right Audio output Use included cable adaptor to break-out RCA connections. Audio output is always active. Composite and component video selection is made using the on-screen ‘settings’ menu. Only one video format can be active.

Power input using wall adapter power supply. 5VDC Xantech-supplied power supply only. Use of any other AC adaptor may damage the XIS100 and will void your warranty.

08905180D - 8 -