08905180D - 9 -
SETTINGS MENU
NOTE: The XIS100 will retain all its settings until they are changed again. To return the XIS100 to its
default settings, place the XIS100 in standby (connected to a power supply, but not turned on). Point
the remote towards the XIS100 and press and hold down the “MENU” button on the remote for more
than 5 seconds. The XIS100 will acknowledge this reset by indicating so on the TV screen (composite
or component output, whichever one that was last selected).
Screensaver:
The XIS100 can be set to have the screensaver turn on at several different times. The timing options
are 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 20 minutes, and never. The use of a
screensaver is highly recommended to protect the display over long term usage. The default setting is
30 seconds.
Indicator Light:
The XIS100 can be set to have its indicator light turn on
for only 1 second after a command is executed, or to
always stay on when the XIS100 is powered on.
Color Scheme:
Several color schemes are available in the XIS100
allowing customized settings to match a room’s décor.
The color choices are green, blue, basic black, red,
black, and touch pad. Touch pad is used for transparent
overlays on touch screen controllers.
Language:
Eight languages can be used on the XIS100 OSD screen. After selecting “language”, pick the
appropriate settings. (Japanese, French, German, Italian, Spanish, Dutch, Russian)
TV Out:
Determine if the video output should be ‘composite’ or ‘component’ video format. Only one video
output is allowed at a time. The XIS100 is shipped with ‘composite’ video output setting. If your TV
only offers a composite video input and you accidentally select component video on your XIS100, you
will need to reset the XIS100 (see page 9 top portion).
Album Art:
Depending on user preference, the Album Art can be set to either ‘on’ or ‘off’. When set to ‘on’, the
Album Art will display (only if Album Art is found on the iPod). And when set to ‘off’, no album art will
be displayed.
Serial Port Settings:
The XIS100 is shipped with ‘RS232’ setting. The serial port can be set to RS232 or RS422. RS232 is
standard usage for equipment located in the same room. For long distance, select RS422. Different
baud rates are available for serial port communication. Select baud rates from 57.6 kbps, 19.2 kbps,
or 9600 kbps. Default baud rate is 57.6 kbps.