9.After the AC Charger is turned off or disconnected from an AC outlet, the Recharge Indicator may continue to illuminate for a brief period. This is normal and occurs because of the residual electrical energy that is stored in the AC Charger’s circuitry.

Note: Battery Level Indicator readings will not be accurate until the batteries have “rested” for 15 minutes after charging.

Recharging from your Vehicle

Using the DC Charging Cable, XPower 1500 can be recharged as you drive. Simply plug either end of the DC Charging Cable into XPower 1500’s DC Power Socket, and the other end into the vehicle’s cigarette lighter socket or 12-volt accessory outlet. With the motor running, the battery pack will be fully charged in 6 to 8 hours.

When using the DC Charging Cable there is no automatic charge regulation; however, most vehicle voltage regulators will ensure XPower 1500 is not overcharged. This charging method must not be used with vehicles having abnormally high voltage systems that operate above 15 volts DC.

Disconnect the DC Charging Cable at both ends once XPower 1500 is fully charged or when your vehicle’s motor is not running. Do not leave XPower 1500 permanently connected to the vehicle’s lighter socket or 12- volt accessory outlet.

\

CAUTION: Equipment damage

While XPower 1500 is being recharged with the DC Charging Cable from your vehicle, do not operate AC products over 120 watts from its AC outlets.

2–18

445-0127-01-01

Page 29
Image 29
Xantrex Technology 1500 manual Recharging from your Vehicle

1500 specifications

Xantrex Technology is a well-regarded name in the field of power conversion solutions, particularly known for its advanced inverter and charger systems for various applications, including recreational vehicles, marine, and mobile power systems. Three of their popular models are the Xantrex inverter series: the 800, 1500, and 1750. Each model is designed to provide reliable, efficient power in a compact form factor, catering to different power needs.

The Xantrex 800 inverter delivers 800 watts of continuous power, making it suitable for smaller applications such as charging electronic devices, powering lights, or running small appliances. It combines a sine wave output with high-efficiency technology to ensure compatibility with sensitive electronics. One of its main features is an easy-to-use interface, typically including LED indicators, that allows users to monitor power status at a glance.

The Xantrex 1500 inverter ups the ante by offering 1500 watts of continuous power. It is particularly well-suited for larger loads, such as microwave ovens or small refrigerators. This model incorporates advanced power management technology, ensuring better load handling and energy efficiency. The built-in safety features, including over-voltage and over-temperature protection, enhance the reliability of this inverter for longer-term applications.

The Xantrex 1750 inverter is the most powerful among the three, delivering 1750 watts of continuous output. This model is ideal for users who require robust power supply capabilities, such as on extended camping trips or in off-grid scenarios. It features a user-friendly interface with digital displays that provide detailed information on power usage, battery status, and operational conditions. This inverter is designed with advanced technology to maximize efficiency and minimize power loss during operation.

All three models utilize pure sine wave technology, which is crucial for ensuring the safe operation of sensitive electronics. They also include features such as automatic shutdown in the event of excessive heating or other anomalies, ensuring protection for both the inverter and the devices connected to it. Additionally, compact and lightweight design makes these inverters easy to install and transport, making them ideal for a variety of mobile and stationary applications. Whether you require minimal power for small devices or a more robust system for larger loads, Xantrex Technology offers versatile inverter options to meet diverse needs.