Xantrex Technology 1500 manual WARNING Personal injury, 2-22, 445-0127-01-01

5.Use the black Terminal Cover to fasten the 5/16” ring type connector on the other end of the negative (black or marked negative) cable to XPower 1500’s negative High Power DC Terminal (black). Again, tighten firmly, but do not over tighten.

6.To disconnect the external battery, simply follow steps 2-5 in reverse order.

Important: Unless the external battery is a lead acid, 17 amp-hour, AGM design, it must be disconnected from XPower 1500 prior to recharging XPower 1500’s internal battery pack. The AC Charger and DC Charging Cable supplied should only be used to charge (a connected) external battery that has the same amp-hour rating and design as XPower 1500’s internal battery pack. If your external battery is not the type specified above, disconnect it from XPower 1500 and charge it with a separate battery charger.

WARNING: Personal injury

Disconnect the external battery prior to moving XPower 1500 to prevent damage to the connecting cables or the external battery, and to avoid possible injury to you or another person.

2–22 445-0127-01-01