3.4Operating 12-Volt DC Products

1.Ensure the internal battery is fully charged. (See Section 8 for details.)

2.Plug the accessory into the DC Power Socket, and switch the accessory on (if required). Portable Power 250 will operate any 12-volt DC auto or marine accessory that draws 12 amps or less.

3.Because the DC Power Socket is internally wired direct to the internal battery, extended operation of a 12-volt accessory may result in excessive battery discharge. Important: Care must be taken to ensure the battery does not become totally discharged. (See Section 6.1 for details.)

3.5Recharging Jazz Portable Power 250

1.The battery’s charge level may be seen by pressing the Battery Status Button on the front of the product.

2.To recharge, plug the AC Charger into a household AC outlet and plug the AC Charger cord into the Charger Input Socket located below the AC outlet. The Recharge Indicator will change from amber to green when charging is complete (about 35 hours). It is safe (and recommended) to leave the AC Charger connected when Portable Power 250 is stored.

3.Charging may also be done from the 12-volt outlet or lighter socket in a vehicle. (See Section 8.3 for details.)

3.6Using Jazz Portable Power 250 to Jump- Start a Vehicle

Please review Section 7 for a detailed explanation.

5