INSTALLATION
The Automatic Generator Start Control System (AGS) consists of two modules, the Remote Panel and the Controller.
Service Precaution Labels
Install service precaution labels on or near the generator and near the AGS Remote.
AGS Remote Panel
This AGS Remote Panel provides information and control of the Control Module. Power for this Remote Panel comes from the Control Module. The Remote Panel comes on automatically when power is applied to the AGS Control Module.
The AGS Remote Panel measures 5.75'' (W) X 3.75'' (H) X 0.65''
(D). Use the supplied template to cut the proper size hole. Mount the Remote Panel unit using the screws supplied.
Route the control cable from the AGS Remote Panel to the Control Module. Connect the control cable to the AGS Remote Panel and Control Module using the data connectors on the supplied cable.
Power Up Indications
When power is first applied to the AGS Remote, the AGS Remote establishes communications with the Controller. It can take up to four seconds to establish communications.
AGS Controller
The AGS Controller may be mounted in any convenient location. Mount the AGS Controller using the screws supplied. The AGS Controller may be mounted up to 250 feet from the AGS Remote.
8