Xantrex Technology C40R/50 Remote, C40R/100 Remote manual Introduction, Faceplate and Remote

1 Introduction

Thank you for purchasing the Xantrex C-Series Meter Display. The C-Series Meter Display is an optional accessory for the C-Series Multifunction DC controllers C35, C40 and C60. It provides a digital display of the voltage, current, and amp-hour status for the C-Series Multifunction DC Controller.

The C-Series Meter Display comes in two versions:

•the faceplate (DVM/C40), which replaces the front cover.

•the remote (C40R/50 and C40R/100), which can be installed remotely up to 1,000 feet away from the controller.

Note: The C40R/50 and C40R/100 comes with either a 50 or 100 foot cable. It can also be installed up to 1,000 feet from the Controller. However, Xantrex does not provide cables exceeding 100 feet.

The Faceplate The Remote

Figure 1 The Faceplate and Remote

Please note that labeling shown on the product photographs in this guide may not exactly match the unit you purchased.

975-0123-01-01 Rev A 1