Installing the HI400

2.Route the lockout signal wire through the cable clamp and into the hardwire compartment.

3.Strip approximately ½ inch off the insulation of the red ignition lockout wire and the lockout signal wire (if using the twist-on wire connectors provided). If you are providing your own connectors, follow the manufacturer’s recommendations regarding strip length and use of the connectors.

4.Connect the lockout signal wire to the red ignition lockout wire provided in the hardwire compartment. Check to make sure the wires are making a good connection, and secure the twist-on wire connector with electrical tape.

5.Re-install the hardwire compartment cover plate.

6.Tighten the cable clamp so that the AC output cable and ignition lockout wiring are secured. Check to make sure the clamp is securing the overall jacket of the AC output cable (not the individual conductors), and that no wiring is being pinched in the corners of the clamp.

Connecting the DC cables

CAUTION

Before making the final DC connection, check cable polarity at both the battery and the inverter. Positive (+) must be connected to positive (+); negative (–) must be connected to negative (–).

Reversing the positive (+) and negative (–) battery cables will damage the inverter and void your warranty. This type of damage is easily detected.

WARNING: Fire hazard

Use only appropriately sized copper wire. Make sure all DC connections are tight. Loose connections will overheat.

19

Page 29
Image 29
Xantrex Technology HI400 manual Connecting the DC cables

HI400 specifications

Xantrex Technology HI400 is a high-performance, pure sine wave inverter designed for a variety of off-grid and backup power applications. Renowned for its efficiency and reliability, the HI400 provides an output of 400 watts, making it suitable for powering sensitive electronic devices and appliances, such as laptops, medical equipment, and home entertainment systems. Its pure sine wave output ensures that the devices operate smoothly, without causing interference or damage.

One of the main features of the HI400 is its advanced surge capability. This inverter can deliver short bursts of power significantly higher than its rated output, allowing it to start devices with high inrush currents, like refrigerators and air conditioners. The inverter is equipped with a built-in transfer switch for seamless switchover between grid power and inverter power, ensuring uninterrupted operation during power outages.

The HI400 incorporates Xantrex’s proprietary technology, which enhances its durability and operational efficiency. The inverter features a high-frequency design that minimizes energy losses, resulting in a lower overall power consumption. It also operates quietly, making it ideal for use in residential environments where noise might be a concern.

Another characteristic of the HI400 is its lightweight and compact design, which facilitates easy installation and portability. The unit can be mounted in various locations, making it versatile for both mobile and stationary applications. The inverter comes with a range of safety features, including overload protection, short-circuit protection, and thermal shutdown, ensuring that it operates safely and prolongs its lifespan.

User-friendly features enhance the overall appeal of the HI400. It includes LED indicators that provide real-time information about the operational status, such as input voltage, output load, and fault conditions. This enables users to easily monitor performance and troubleshoot any issues that may arise.

Overall, the Xantrex Technology HI400 stands out as a reliable and efficient power inverter solution. Its combination of advanced technologies, safety features, and user-friendly design makes it a go-to choice for anyone looking to power their devices off the grid or during emergencies.