Installing the HI400

7.Insert the other end of the negative (–) cable into the negative (–) terminal on the HI400 and tighten the terminal screw. Ensure all strands of wire are inside the connector (no stray strands). The terminal manufacturer’s recommended tightening torque is 21 inch-pounds.

8.Attach the positive (+) cable to the breaker or fuse and disconnect combination installed on the battery positive

(+) terminal in step 5. Tighten the connection according to the manufacturer’s recommendations.

9.Insert the other end of the positive (+) cable into the positive (+) terminal on the HI400 and tighten the terminal screw. Ensure all strands of wire are inside the connector (no stray strands). The terminal manufacturer’s recommended tightening torque is 21 inch-pounds.

10.Verify the polarity of the DC connections is correct: positive (+) on the inverter connected to the positive (+) on the battery, and negative (–) connected to the negative (–).

When you are ready to operate the inverter, close the DC circuit breaker or disconnect switch to supply DC power to the inverter.

Connecting the DC ground

The chassis ground lug on the DC end of the inverter is used to connect the chassis of the inverter to your system’s DC grounding point as required by installation codes for some installations.

Use copper wire that is either bare or provided with green insulation. Do not use the DC ground lug for your AC output grounding wire (see the AC wiring instructions on page 12 in this section).

To connect the DC ground:

Connect a No. 8 AWG copper wire between the HI400’s chassis ground lug and the DC grounding point for your system.

21

Page 31
Image 31
Xantrex Technology HI400 manual Connecting the DC ground, To connect the DC ground

HI400 specifications

Xantrex Technology HI400 is a high-performance, pure sine wave inverter designed for a variety of off-grid and backup power applications. Renowned for its efficiency and reliability, the HI400 provides an output of 400 watts, making it suitable for powering sensitive electronic devices and appliances, such as laptops, medical equipment, and home entertainment systems. Its pure sine wave output ensures that the devices operate smoothly, without causing interference or damage.

One of the main features of the HI400 is its advanced surge capability. This inverter can deliver short bursts of power significantly higher than its rated output, allowing it to start devices with high inrush currents, like refrigerators and air conditioners. The inverter is equipped with a built-in transfer switch for seamless switchover between grid power and inverter power, ensuring uninterrupted operation during power outages.

The HI400 incorporates Xantrex’s proprietary technology, which enhances its durability and operational efficiency. The inverter features a high-frequency design that minimizes energy losses, resulting in a lower overall power consumption. It also operates quietly, making it ideal for use in residential environments where noise might be a concern.

Another characteristic of the HI400 is its lightweight and compact design, which facilitates easy installation and portability. The unit can be mounted in various locations, making it versatile for both mobile and stationary applications. The inverter comes with a range of safety features, including overload protection, short-circuit protection, and thermal shutdown, ensuring that it operates safely and prolongs its lifespan.

User-friendly features enhance the overall appeal of the HI400. It includes LED indicators that provide real-time information about the operational status, such as input voltage, output load, and fault conditions. This enables users to easily monitor performance and troubleshoot any issues that may arise.

Overall, the Xantrex Technology HI400 stands out as a reliable and efficient power inverter solution. Its combination of advanced technologies, safety features, and user-friendly design makes it a go-to choice for anyone looking to power their devices off the grid or during emergencies.