Recharging with the AC Charger | Xantrex Technology Powerpack 300

Using XPower Powerpack for the First Time

Using XPower Powerpack for the First Time

Important: Prior to operating your AC appliance or 12 V DC appliance, ensure that the battery of the XPower Powerpack is fully charged. If the battery has been fully discharged, recharging with the AC charger may take up to 24 hours.

Recharging with the AC Charger

Note: The XPower Powerpack battery level LEDs are only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for fifteen minutes.

Recharging with the AC charger is a true “plug-in-and- forget” charging method. We recommend leaving the AC charger connected when the XPower Powerpack is not in use.

CAUTION

Do not operate AC or DC appliances with the XPower Powerpack while the XPower Powerpack is being recharged with the AC charger.

The AC charger may be permanently damaged if AC appliances or 12 V DC appliances are operated while the AC charger is connected.

To recharge with the AC charger:

1.Disconnect any 12 V DC appliances from the DC power outlets.

2.Disconnect any AC products from the XPower Powerpack and turn the AC Power ON/OFF switch to OFF.

3.Insert the AC charger cable end into the AC charger input socket located under the red jump-starting clamp (see figure on page 6).

4.Plug the AC charger into a standard AC wall outlet.

The Battery Status LED changes from red to green when charging is complete (about 24 hours if the battery is completely discharged).

11

Image 24

Xantrex Technology Powerpack 300 manual Recharging with the AC Charger, To recharge with the AC charger

Contents

XPower Powerpack Emergency Power XPower Powerpack Date and Revision Purpose Organization Conventions Used Abbreviations and Acronyms Important Safety Instructions Important Safety Information Important Safety Information Precautions When Working With Your Vehicle Battery Vii Precautions for Using Rechargeable Appliances Contents Maintenance TroubleshootingSpecifications About the XPower Powerpack Comprehensive ProtectionAutomatic Overload Overheating Low Battery Protection Features Materials List XPower Powerpack Features Feature DescriptionFront Panel Detail Not Left Side View Accessories Accessory DescriptionPage Operation Operating Conditions and Guidelines Choosing a Location Recharging with the AC Charger To recharge with the AC charger Recharging with the AC Charger Using the Flashlight To recharge the flashlight from the XPower Powerpack Operating AC Appliances Understanding AC AppliancesAC Appliance Watts a Hours b High Surge Appliances Operating an AC Appliance To operate an AC appliance Operating 12 V DC Appliances DC Appliance Watts a Hours b Jump-Starting a Vehicle’s Engine To operate a 12 V DC appliance To jump-start a vehicle or boat engine Jump-Starting a Vehicle’s Engine Using the Air Compressor Over-temperature Safety Protection Inflating Tires To inflate your vehicle, motorcycle, or bicycle tires Inflating Small Sports Equipment To inflate small sports equipment Connecting to an External Battery Connecting to an External Battery Page Maintenance Battery Maintenance Recharging the XPower Powerpack Battery Recharging with the AC Charger To recharge with the AC charger Recharging with the DC Charging Cable Recharging the XPower Powerpack Battery Recharging with a Generator’s Regulated 12 V DC Outlet To wire the coaxial DC connector Recharging from a Solar Panel Recycling Common Problems Buzz in Audio EquipmentTelevision Interference Troubleshooting Reference Problem Possible Cause Solution Troubleshooting Reference 1Troubleshooting reference Switch on Page Electrical Specifications DC Section AC Power Section Internal Battery Charging Controller System Physical Specifications AccessoriesPhysical specifications XPower Powerpack Physical specifications Internal SW12120 batteryPage Warranty and Return Warranty Disclaimer ProductExclusions Return Material Authorization Policy Return Procedure Out of Warranty Service Information About Your System