PROwatt 1000 Features
2–4
Back Panel (DC End)Figure 2-2 Back Panel: DC End
Designed in Canada
Assembled in China
➀➁ ➂
➃
Featur e Descr iptio n
➀
➀➀
➀Ventilation Openings For safety and proper operation of the
inverter, these openings (and the openings on the bottom of the
inverter) must not be obstructed. When the inverter is mounted,
these ventilation openings must not point up or down. In other
words, neither the front panel (AC end) nor the back panel (DC end)
should point up or down.
➁
➁➁
➁Knockout for AC Wiring Provides access to the internal AC output
terminal blocks if you want to connect the inverter to an existing AC
circuit.
➂
➂➂
➂Chassis Ground Screw Connects to earth ground, to vehicle
chassis, or to DC grounding bus or engine’s negative bus (in marine
installations).
➃
➃➃
➃Positive and Negative DC Cabling Terminals
PROWatt100.book Page 4 Friday, January 5, 2001 3:03 PM