Xantrex Technology RC/GS, RC7 owner manual Choosing a location, Mounting and Connecting

RC-GS_manual.book Page 7 Friday, May 20, 2005 4:57 PM

Installing the RC/GS and RC7

Choosing a location

Choose a location that is easily accessible. The RC/GS and RC7 should be mounted where they are clearly visible, with unobstructed access to the screen and buttons.

The location should be indoors, dry, and free from corrosive or explosive fumes.

Mounting and Connecting

WARNING: Fire hazard

The RC/GS and RC7 are not ignition protected. Do not install in areas requiring ignition-protected equipment.

WARNING: Shock hazard

Before making an opening in a wall, bulkhead, or panel, ensure there is no wiring or other obstruction within the wall.

To install the remote:

1.Refer to Figure 2-1 for hole and cutout dimensions or install the remote in a standard double-gang outlet box.

2.Pilot-drill the mounting holes (if necessary, depending on your mounting surface) and, using a jigsaw, cut out the hole in which the remote will be inserted.

	4-1/8"
4"	CUT OUT THIS AREA	4-1/4" c-c
	FRONT VIEW
	PHONE
	JACK
	5-3/16" c-c
Figure 2-1	Installation Dimensions
975-0210-01-01		7