Xantrex Technology RC/GS, RC7 - page 20

Installation
8 975-0210-01-01
3. Run the cable between the remote and the RV Series
Inverter/Charger.
4. Place the ON/OFF switch on the RV Series Inverter/
Charger to the OFF position and disconnect the AC power.
5. Connect the communications cable into the RJ11 port on
the inverter/charger marked “Remote Control” (Figure 2-2).
6. Connect the other end of the cable into the jack on the
remote (Figure 2-3).
7. Secure the remote to the wall or outlet box using the
appropriate screws (4 required).
Figure 2-2 RV Series Inverter/Charger Front Panel
Figure 2-3 RC/GS and RC7 Back View
Remote Control port ON/OFF switch
Remote
cable jack
RC-GS_manual.book Page 8 Friday, May 20, 2005 4:57 PM