NOTE: The front door will not close if the securing bar is not properly attached to the stacker frame.
9 Close the EHCS front door.
10 Follow the instructions displayed on the digital press Touch Screen to resume printing.
E N H A N C E D H I G H C A P A C I T Y S T A CK E R
Unloading the Stacker Tray
Use the following procedure to unload the Stacker Tray when it is full, or you want to retrieve a job that has been completed.
1Press the Unload button on the Stacker Control Panel. The Wait light blinks until the Stacker Tray has reached the down position.
2Open the front door when the Unload Light illuminates.
3Position the securing bar on top of the stacked paper.
4Pull the Stacker Cart straight out.
5Remove the securing bar.
6Remove the paper from the Stacker Tray.
7Push the empty Stacker Cart straight into the EHCS.
8Position the securing bar on the fixed area inside the EHCS.
ENHANCED HIGH CAPACITY STACK ER
EHCS F O R D O C U C O L O R 2060/2045 OP E R A T O R MA N U A L | 7 |
