SA F E T Y N O T I C E S
Laser Safety
Use of controls, adjustments, or procedures other than those specified in this documentation may result in a hazardous exposure to laser radiation.
This equipment complies with international safety standards.
With specific regard to laser safety, the equipment complies with performance standards for laser products set by government, national, and international agencies as a Class 1 laser product. It does not emit hazardous light, as the beam is totally enclosed during all phases of customer operation and maintenance.
Maintenance Safety
•Do not attempt any maintenance procedure that is not specifically described in the documentation that is supplied with your press.
•Do not use aerosol cleaners. The use of supplies that are not approved may cause poor performance of the press, and could create a dangerous condition.
•Use the supplies and cleaning materials only as directed in this manual. Keep all of these materials out of the reach of children.
•Do not remove the covers or guards that are fastened with screws. There are no parts behind these covers that you can maintain or service.
Do not perform any maintenance procedures unless you have been trained to do them by a Xerox representative, or unless a procedure is specifically described in one of the manuals included with your press.
EHCS F O R D O C U C O L O R 2060/2045 OP E R A T O R MA N U A L | v |
