SA F E T Y N O T I C E S
Operational Safety
Your Xerox equipment and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines will help ensure the continued safe operation of your digital press:
•Use the materials and supplies specifically designed for your digital press. The use of unsuitable materials may result in poor performance of the machine and possibly a hazardous situation.
•Follow all warnings and instructions that are marked on or supplied with the machine.
•Place the machine in a room that provides adequate space for ventilation and servicing.
•Place the machine on a level, solid surface (not on a thick pile carpet) that has adequate strength to support the weight of the machine.
•Do not attempt to move the machine. A leveling device that was lowered when your machine was installed may damage the carpet or floor.
•Do not set up the machine near a heat source.
•Do not set up the machine in direct sunlight.
•Do not set up the machine in line with the cold air flow from an air conditioning system.
•Do not place containers of coffee or other liquid on the machine.
•Do not block or cover the slots and openings on the machine.
•Do not attempt to override any electrical or mechanical interlock devices.
WARNING: Be careful when working in areas identified with this warning symbol. These areas may be very hot and could cause personal injury.
If you need any additional safety information concerning the machine or materials, contact your Xerox representative.
vi | EHCS F O R D O C U C O L O R 2060/2045 O P E R A T O R M A N U A L |
