Xerox 92C NPS Job status feedback, DocuPrint job status feedback, Platform Job status capability

				CLIENT WORKSTATIONS
		Table 7-1.	DocuPrint NPS clients
Client			Protocol;
workstation	Operating	Ethernet	Translation
hardware	system	connection	requirements	Job submission method
Digital	ULTRIX	Optional	TCP/IP;	Print directly from application,
Equipment		Ethernet	none	or use the lpr command or
Corporation		interface		Xerox Client Software.
DECstation
Apple	Apple OS	Optional	AppleTalk using	Print directly from application or
Macintosh		Ethernet	EtherTalk Phase I or	use Xerox DocuPrint Print
		interface	II; none	Submission Client software for
				the Macintosh.
IBM RS/6000	IBM AIX	Standard	TCP/IP;	Print using Xerox Client
			none	Software.
HP/Apollo	HP-UX	Standard	TCP/IP;	Print using Xerox Client
			none	Software.

Job status feedback

	Client workstations display fault messages and additional
	information, such as the status of feeder trays and output bins. If
	properly configured, the workstations may be able to display job
	status, as shown below.
	Table 7-2.DocuPrint job status feedback
Platform	Job status capability
Sun Workstation	Job status and job deletion are available by issuing the appropriate
	command at the command line.
	Job status information is available for jobs submitted using Xerox
	Client Software.
IBM and compatible	Job status and job deletion are available depending on the TCP/IP
personal computers	software installed on the workstation. You must issue the appropriate
	command at the command line.
	Job status information is available for jobs submitted using Xerox
	Client Software.
	Job status information is available using the Novell PCONSOLE
	utility if DocuPrint is configured with a RPRINTER or PSERVER
	implementation.
Apple Macintosh	Job status information is available at the workstation through
	AppleTalk.
IBM RS/6000 and HP/	Job status information is available for jobs submitted using Xerox
Apollo	Client Software or Ipstat (native utility).

To determine the status of jobs submitted using the lpr command, you must issue an lpq command at the command line. Some application software packages may provide a simplified means of obtaining job status, perhaps using icons.

XEROX DOCUPRINT 92C NPS SYSTEM OVERVIEW GUIDE 7-3