Xerox XA7-19i manual Method 2 DigitalDVI Connection, Connect to the DVI port

Installation

Method 2: Digital(DVI) Connection

1Turn off the computer and unplug the power cable.

2Connect the signal cable (DVI-I) to the DVI port on the back of the computer.

3Connect the AC power cable to the power socket on the back of the monitor.

4Plug the computer and monitor power cables into a nearby outlet.

5Press the POWER/ button on the front panel of the LCD monitor to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections.

3	4	Connect to
		wall outlet

2 Connect to the DVI port

If the screen displays “out of range”, please follow the instructions below to set up:

•Press the MENU button to display the OSD.

•Press the UP or DOWN button to highight the (INPUT SELECT) icon, then press the MENU button. The OSD displays:

1 2 1 2

DIGITAL INPUT

•Press the UP or DOWN button to select DIGITAL INPUT.

12 Xerox© LCD Monitor User’s Manual