8
SOURCE / POWER
7
DISP/SETUP Rotary Knob
5Up
6Down
Initial Setup
Modulator frequency setting
1.Press and hold the DISP SETUP for 2 seconds or more.
2.Turn the rotary encoder or press the 6 or 5 button to select the frequency setting mode (displays the frequency of the desired modulation station).
3.Press the 7 or 8 button to set the frequency.
4.The frequency is varied by 200kHz (0.2MHz) steps from 87.7 to 89.9 MHz.
5.Press the DISP SETUP button to return to normal mode.
Note: In order to resume normal AM and FM radio reception, turn the power of the XM radio display module off. Press and hold the SOURCE POWER button for 2 seconds or more
7