JVC HR-S9600EK setup guide AV1 Select Setting, AV2 Select Setting

40ADVANCEDOPERATIONS(cont.)

AV1 SELECT Setting

Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV1 IN/OUT connector of this recorder.

1Press MENU to access the Main Menu screen.

2Press %Þ to move the highlight bar (pointer) to "MODE SET", then press OK or #.

3 Press %Þ to move the highlight bar (pointer) to "AV1 SELECT". 4 Press OK or #to select "VIDEO" or "S-VIDEO".

a–VIDEO	: If a connected device's output is compatible only with regular video signals,
	set "AV1 SELECT" to "VIDEO".
b–S-VIDEO	: If a connected device's output is compatible with Y/C signals, set "AV1
	SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
	quality S-VHS pictures.

5Press MENU to return to normal screen.

●If "AV2 SELECT" is set to "DECODER", it is impossible to set "AV1 SELECT" to "S-VIDEO".

MODE SET
B. E. S. T.	ON
PICTURE CONTROL	AUTO
AUTO TIMER	OFF
O. S. D.	ON
DIRECT REC	ON
AUTO SP=LP TIMER	OFF
DIGITAL 3R	ON
NEXT PAGE
[5°] =
[MENU] : EXIT

PREVIOUS PAGE
POWER SAVE	OFF
S-VHS	AUTO
AV1 SELECT	VIDEO
AV2 SELECT	AV2
TIME SCAN AUDIO	ON
[5°] =
[MENU] : EXIT

AV2 SELECT Setting

Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN/DECODER connector of this recorder.

1Press MENU to access the Main Menu screen.

2Press %Þ to move the highlight bar (pointer) to "MODE SET", then press OK or #.

3 Press %Þ to move the highlight bar (pointer) to "AV2 SELECT". 4 Press OK or #to select "AV2", "DECODER" or "SAT".

a–AV2	: To use this recorder as the recording deck with the player connected to the
	AV2 IN/DECODER connector, or to use the satellite tuner connected to the
	AV2 IN/DECODER connector.
b–DECODER	: To use a decoder connected to the AV2 IN/DECODER connector.
c–SAT	: To view a satellite programme with the TV set while the recorder is in Timer
	mode, in Stop mode, recording or turned off. (☞ pg. 30)

5Press MENU to return to normal screen.

●If you have a satellite receiver or a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back to appropriate mode after editing.

●If you're not connecting a satellite receiver or a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to "AV2".

●The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a satellite receiver or a decoder, be sure to set "AV2 SELECT" back to appropriate mode.

●If the AV1 OUT switch on the rear panel is set to Y/C, it is impossible to set "AV2 SELECT" to "DECODER".

MODE SET
B. E. S. T.	ON
PICTURE CONTROL	AUTO
AUTO TIMER	OFF
O. S. D.	ON
DIRECT REC	ON
AUTO SP=LP TIMER	OFF
DIGITAL 3R	ON
NEXT PAGE
[5°] =
[MENU] : EXIT

PREVIOUS PAGE
POWER SAVE	OFF
S-VHS	AUTO
AV1 SELECT	VIDEO
AV2 SELECT	AV2
TIME SCAN AUDIO	ON
[5°] =
[MENU] : EXIT