JVC HR-S9600EK setup guide Insert Editing, Reset the Counter, Number

44ADVANCEDOPERATIONS(cont.)

Insert Editing

Recorder Your recorder

C.RESET/CANCEL

S-Video signal Audio/Video signal

Another recorder

Player

JOG

8

13

2

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

Source tape

		Before insert editing	Normal audio
Recorded tape			track
		After insert editing
			Video/Hi-Fi
			audio track
	MAKE CONNECTIONS
	Connect the player's VIDEO OUT or S-VIDEO OUT
	and AUDIO OUT connectors to your recorder's VIDEO
1 or S-VIDEO and AUDIO input connectors on the front
	panel.
2	SET INPUT MODE
	Press NUMBER key "0" and/or TV PROG so that "F-1"
	for the VIDEO/AUDIO input connectors or "S-1" for
	S-VIDEO/AUDIO input connectors appears in place of
	a channel number.
	LOCATE END POINT
	Load the recording cassette into your recorder, and play
3 it back to determine the edit-out point (the end of the

TV	PROG		PAUSE
	2
	1	2	3
	NUMBER	5	6
	4
	"0"	8	9
	7
0000		0
	1
	2

SHUTTLE

3

4

4

3

TV PROG

	segment to be replaced) using the SHUTTLE ring or the
	JOG dial or pressing @#and PAUSE.
	RESET THE COUNTER
	Press C.RESET/CANCEL (or 0000) to change the
4 counter display to "0:00:00".
5	LOCATE START POINT
	Determine the edit-in point (the beginning of the
	segment to be replaced) using the SHUTTLE ring or the
	JOG dial or pressing @#and PAUSE.
	● Be sure to engage the Still mode at the edit-in point.

PAUSE

￿